BNPLN - 9680, SULFURIC ACID

  • MSDS: BNPLN
  • Manufacturer: J T BAKER INC
  • Product Name: 9680, SULFURIC ACID
  • National Stock Number: 6810-00-146-7515
Product Identification

Product ID:9680, SULFURIC ACID
MSDS Date:05/01/1989
FSC:6810
NIIN:00-146-7515
MSDS Number: BNPLN

Responsible Party
J T BAKER INC
222 RED SCHOOL LANE
PHILLIPSBURG, NJ 08865-2219
US

Emergency Phone: 201-859-2151;800-424-9300(CHEMTREC)

Info Phone: 201-582-2537

Cage: DO803

Contractor
MALLINCKRODT BAKER, INC.
PHILLIPSBURG, NJ 08865 US

Telephone: 800-582-2537

Cage: 70829

Ingredients

SULFURIC ACID

CAS: 7664-93-9

RTECS: WS5600000

Fraction By Weight: 90-98%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3;3 MG/M3 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 2-10%

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT)2140 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: SEVERE IRRITATION
OR BURNS OF RESPIRATORY SYSTEM, PULMONARY EDEMA, LUNG INFLAMMATION.
SKIN/EYE: SEVERE BURNS. SKIN ABSORPTION: NONE IDENTIFIED.
INGESTION: NAUSEA, VOMITING, SEVERE B URNS TO MOUTH, THROAT, AND
STOMACH, KIDNEY DISFUNCTION. CHRONIC: LUNG DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT
Medical Cond Aggravated by Exposure:RESPIRATORY SYSTEM DISEASE.

First Aid

First Aid:INGESTION: CALL A DOCTOR. DO NOT INDUCE VOMITING. IF
CONSCIOUS, GIVE LARGE AMOUNTS OF WATER. INHALATION: REMOVE TO FRESH
AIR. IF NOT BREATHING, GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS
DIFFICULT, GIVE OXYGEN. SKIN: IMMEDIATELY FLUSH WITH WATER FOR AT
LEAST 15 MINUTES AND REMOVE CONTAMINATED CLOTHING. WASH CLOTHING
BEFORE REUSE. EYES: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15
MINUTES.

Fire Fighting

Extinguishing Media:USE DRY CHEMICAL OR CARBON DIOXIDE. DO NOT USE
WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT. DO NOT GET WATER INSIDE CONTAINERS.
Unusual Fire/Explosion Hazard:REACTS W/MOST METALS TO PRDCE HYDROGEN
GAS, WHICH CAN FORM AN EXPLO MIX W/AIR. A VIOLENT EXOTHERMIC RXN
OCCURS W/H2O. SUFFICIENT HEAT MAY BE PRDCD (SUPP DATA)

Accidental Release

Spill Release Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT CLTHG.
STOP LEAK IF YOU CAN DO SO W/OUT RISK. DO NOT USE WATER. NEUTRALIZE
SPILL &/OR WASHING WITH SODA ASH OR LIME. W/CLEAN SHOVEL, PLACE
MATL INTO CLEAN, DRY CONTR & COVER. MOVE CONTR(S) FROM SPILLAREA.
Neutralizing Agent:J.T. BAKER NEUTRASORB (R) OR TEAM 'LOW NA+' ACID
NEUTRALIZERS. SODA ASH/LIME.

Handling

Handling and Storage Precautions:KEEP CONTAINERS TIGHTLY CLOSED. LOOSEN
CLOSURE CAUTIOUSLY. STORE IN CORROSION-PROOF AREA. KEEP CONTAINERS
OUT OF SUN AND AWAY FROM HEAT.
Other Precautions:ISOLATE FROM INCOMPATIBLE MATERIALS. DO NOT GET IN
EYES, ON SKIN, OR ON CLOTHING. DO NOT BREATHE VAPORS.

Exposure Controls

Respiratory Protection:NONE REQUIRED WHERE ADEQUATE VENTILATION
CONDITIONS EXIST. IF AIRBORNE CONCENTRATION EXCEEDS TLV, NIOSH/MSHA
APPROVED SCBA IS ADVISED.
Ventilation:USE GENERAL OR LOCAL EXHAUST VENTILATION TO MEET TLV
REQUIREMENTS. VENT HOOD.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORK GOGGLES, FULL FACESHIELD
Other Protective Equipment:UNIFORM, PROTECTIVE SUIT, LAB COAT, APRON.
DELUGE SHOWER AND EMERGENCY EYE WASH
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
PH: 1.0 (0.1 M SOLUTION). EXPLOSION HAZARD: TO IGNITE COMBUSTIBLE
MATERIALS. MATERIALS TO AVOID: SULFIDES, CYANIDES, STRONG OXIDIZING
AGENTS, CARBIDES.

Chemical Properties

HCC:C1
Boiling Pt:B.P. Text:620F,327C
Melt/Freeze Pt:M.P/F.P Text:28.4F,-2.0C
Vapor Pres:< 0.3 @20C
Vapor Density:3.4
Spec Gravity:1.84
Evaporation Rate & Reference:< 1 (BUTYL ACETATE = 1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR, COLORLESS TO YELLOW VISCOUS LIQUID.
ODORLESS.

Stability

Stability Indicator/Materials to Avoid:YES
WATER, MOST METALS, ORGANIC MATERIALS, STRONG REDUCING AGENTS,
COMBUSTIBLE MATLS, STRONG BASES, CARBONATES, (SUPP DATA)
Stability Condition to Avoid:MOISTURE, HEAT.
Hazardous Decomposition Products:OXIDES OF SULFUR, HYDROGEN.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE, AND LOCAL ENVIRONMENTAL REGULATIONS. EPA HAZARDOUS
WASTE NUMBER: D002, D003 (CORROSIVE, REACTIVE WASTE).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.